团簇Co3FeP异构化反应的热力学与动力学研究

为了寻找团簇Co₃FeP的稳定性、结构和内部作用力等规律，利用密度泛函理论，在B3LYP/Lanl2dz的量化水平下对团簇Co₃FeP进行理论计算，得到5种优化构型，并从化学反应热力学与动力学的角度对其异构化反应中的反应物、过渡态和生成物进行了讨论分析。结果表明，所有构型均为C1对称且构型的空间结构对其熵值有影响；构型的稳定性主要由金属原子与非金属原子所决定，并且在常温常压下构型1^（3）、2^（3）和3^（3）可以稳定存在，是大部分异构化反应的最终产物。因此，在实际材料的开发中，不仅需要注意金属原子与非金属原子之间的作用力以确保构型的稳定性，还应首先考虑对稳定构型1^（3）、2^（3）和3^（3）进行相关研究。     

(3+1)维Boussinesq方程的可积性及新相互作用解

借助符号计算软件Maple证明了新的(3+1)维Boussinesq方程具有相容正切可积性,通过选取该方程的相容性条件方程的不同形式的解,得到了新的(3+1)维Boussinesq方程的孤子与其他波的相互作用解,如简单孤子解、孤子与椭圆余弦波作用解和共振孤子解,并给出了孤子与椭圆余弦波作用解和共振孤子解所对应的图形。     

淀山湖水质及与环湖稻田农业面源污染的关系

对淀山湖主要进水和出水口水质进行年度定点监测; 同时, 布置田间试验, 研究不同施肥稻田田面水养分含量动态. 结果表明:淀山湖进出水口水体氨氮和总磷年平均质量浓度分别为 0.47 和 0.13 mg/L, 基本处于 Ⅴ 类水质标准; 进水口水质略劣于出水口, 不同进水口的水质也有很大差异. 进一步研究发现, 淀山湖水质的年度变化与稻田田面水养分的动态变化有密切的相关性, 表明农业面源污染对淀山湖水环境具有显著影响. 在环湖地区, 减少和控制农业面源, 是进一步改善淀山湖水环境质量的关键.     

Self-rolled TiO_2 microscroll/graphene composite for electrochemical dopamine sensing

Dopamine is an important neurotransmitter,and nonenzyme electrochemical sensor of dopamine detection based on highly active material is urgently demanded.In this work,an electrochemical sensor with high sensitivity and selectivity based on self-rolled TiO_2microscroll/graphene composite was developed and validated for dopamine sensing.The device exhibited a superior performance for dopamine detection with a detection limit of 4.25×10~(-9)mol L~(-1),and in the dopamine concentration range of 0.06–90μmol L~(-1),the oxidation currents increased linearly with the concentration.The remarkable performance enhancement was mainly ascribed to the increased surface area due to the porous surface of the TiO_2nanomembrane and highly conductive graphene therein.In addition,we have demonstrated that the sensor could be effectively used on detecting dopamine concentrations in urine samples.Our work demonstrates that the current microscroll-based device is promising in the field of real-time health monitoring for future human community.     

Effect of Al on microstructure and mechanical properties of as-extruded Mg–1Mn alloy sheet

The effect of Al addition on microstructure and mechanical properties of hot extruded Mg–1 Mn alloy sheet was investigated. The results revealed that the dynamic recrystallization was promoted by increasing Al content. The ultimate tensile strength and yield strength of the alloy increased with the increase of Al content. The Mg–9 Al–1 Mn alloy exhibited the highest strength, with tensile strength of 308 MPa, 307 MPa, 319 MPa, yield strength of 199 MPa, 207 MPa, 220 MPa and the elongation of 20.9%, 20.1%, 19.2% in 0°, 45°, 90°, respectively.The high strength was mainly attributed to the formation of fine dynamically recrystallized grains and large amounts of the second phase. The strengthening mechanism of the alloys was explained.     

Microstructure,mechanical properties and wear resistance of an Al–Mg–Si alloy produced by equal channel angular pressing

Microstructure, mechanical properties and wear resistance in an ultrafine-grained Al–Mg–Si alloy fabricated utilizing a combination of equal channel angular pressing (ECAP) and dynamic aging were investigated in this paper. The results indicated that the grain size of the ECAP alloy was significantly refined, i.e., to ~239 nm after three ECAP passes. Meanwhile, the yield and tensile strength of the ECAPed material reached 340 MPa and 445 MPa, respectively, while maintaining a significant uniform elongation of 14%. Wear resistance results demonstrated that the wear rate, wear depth and width of the ECAPed material decreased in comparison with the solution-treated (SST) and peak-aged (T6) conditions under a load range of 5–25 N. The adhesive wear that occurs in the undeformed specimens at 10 N does not appear in the ECAPed specimen at the same load, indicating that the ECAPed specimen delay the appearance of more serious wear mechanisms under certain loads. The cooperative interaction of high density nano-scale β" precipitates and dislocations resulted in a combination of super-high strength and good work hardening ability which suppressed the extension of cracks between the friction layer and the plastic deformation zone. As a consequence, the combination of ECAP and dynamic aging brings a significant improvement for antifriction performance of the 6061 aluminum alloy.     

La$_{{1-x}}$Sr$_{x}$TiO$_{3}$ 薄膜的高通量 X 射线衍射

高通量材料合成方法和高通量材料表征手段区别于传统低效率的 "试错法"材料发展方法, 极大地加速了材料科学的变革和发展. 通过设计程序进行了高通量 X 射线衍射实验, 在保证数据分辨率条件下, 高效地表征了 La$_{1-x}$Sr$_{x}$TiO$_{3}$ 薄膜上多个数据位点的晶体结构, 验证了其成分的连续变化性质, 为后续开展更多类型的高通量 X 射线衍射实验提供了指导.     

基于三维点云的岩体结构面自动分类与参数计算

结构面间距是岩体稳定性和力学特性分析中的一个重要参数，在岩石力学、采矿工程、边坡监测等领域的数值计算中广泛应用.本文以岩体边坡露头为研究对象，基于非接触测量获得的三维点云数据，提出一种基于密度聚类的结构面细化分类方法；在结构面粗略分组提取的基础上，通过投影变换、散乱点拟合等算法，求得结构面间距和岩体体积节理数.设计开发了结构面细化分类及间距等参数计算与分析原型系统，实际案例分析表明，本文方法可有效实现结构面的自动细化分类，并能够计算出间距等相关参数，可为岩体质量分级和岩体稳定性分析等提供方法支撑.     

基于BaLuF5∶Yb3+,E3+纳米晶掺杂的聚合物光波导放大器

为提高聚合物光波导放大器的增益性能,利用高温法合成了BaLuF5∶Yb3+,Er3+纳米晶,并分别对纳米晶的形貌、晶体结构和近红外发射特性进行了表征.测试结果表明,纳米晶平均粒径为13 nm,并在1 530 nm处具有较强的发射,荧光半高宽为50 nm.将合成的纳米晶掺杂入SU-8聚合物作为光波导放大器的芯层材料,使用光刻显影等工艺,在表面长有二氧化硅的硅衬底上制备出了聚合物光波导放大器.当980 nm波长泵浦光功率为280 mW、信号光波长为1 530 nm且功率为0.1 mW时,在长度为1.1 cm的光波导放大器中,获得了3.95 dB的相对增益.     

水溶性La_(0.88)Sr_(0.12)MnO_3纳米粒子的非水相合成

采用纳米微乳液法,以三嵌段共聚物聚氧乙烯-聚氧丙烯-聚氧乙烯(PEO-PPO-PEO)为表面活性剂,乙酰丙酮镧(III),乙酰丙酮锰(III)和乙酰丙酮锶(II)为前驱体,1,2-十六烷二醇为还原剂成功合成了水溶性La0.88Sr0.12MnO3纳米粒子.FT-IR分析证实该纳米粒子表面存在PEO-PPO-PEO分子,XRD和TEM分析表明该纳米粒子基本上呈球形、粒径分布窄、结晶度高,VSM测试表明该纳米粒子室温下显示软铁磁性.纳米粒子在水中快速和高效的分散收集过程,表明该纳米粒子具有良好的水溶性和磁操控性.